Disc chipper crusher

Dick chipper crusher has both fonctions of chipping and crushing,different than drum chipper who can only make chipping,or hammer mill who can only make crushing,in effect it’s like an all-in-one machine,we may call it as multifunction crusher.Because it has two functions,so compared with wood chipper or wood crusher,the structure is more complicated and usually with lower capacity.

If the raw material for making pellet or briquette has rod-like shape such as branch or long bar,we may propose this type of machine to replace both chipper and crusher.There is not limit for the raw material size,but if it’s too wide which can’t enter the disc chipper crusher,we have to choose other type equipment,so the size must be limited because of the narrow entry caused by the special construction.For the rod-like raw material which can’t be crushed directly,this machine will be a good choice.
At working time,the raw material will enter through the entry where have rotary disc cutter,they will cut it into chips,then all wood chips will enter the crushing room.Many rotary hammers here will crush these wood chips until crush them into powder,finally the powder will be fine enough for making pellet or briquette.

Technical parameters:

Model DP400 DP600 DP800 DP1000
Disc diameter 400mm 600mm 800mm 1000mm
Knives 4 sets 4 sets 6 sets 6 sets
Power 7.5kw 15kw 30kw 45kw
Capacity 100-200kg/h 150-400kg/h 300-800kg/h 450-1000kg/h
Weight 450kg 700kg 1100kg 1350kg